model: 27mm Black

The Ric Clip security system is fitted ove adjacent wheel nuts: 5 clips
being required on a 10 stud hub. It is inexpensive and no special fitting
tools are required. It is fitted over the nuts and locked by hand or with a
pair of pliers. It takes only minutes to fit and axle set of RIC CLIPs and is
available to fit all standard wheel nut fixings.
Figure 1. Clip shown as received. (Shape may vary). The locking arms are
opened by holding at A and B and pulling in the direction of the arrows.
This increases the inside diameter of the spring coils, allowing the clip to
be fitted over the wheel nuts.
Figure 2. Clip pushed over adjacent wheel nuts and locking arms
released. This provides anti-clockwise resistance to nut rotation.
(Clockwise for left hand nuts).
Figure 3. The locking arms are now locked over each other by hand or
with pliers. This wraps the spring coils tightly round the nuts providing
full anti-clockwise resistance to nut rotation. (Clockwise for left hand
nuts). The RIC CLIP is intended to stop nut rotation in service and to
damp out any vibration frequency in the nut/stud. WHen fitted, any
attempted loosening rotation of the wheel nuts actually increases the
locking action of the RIC CLIP.